Product ID:L-TEC 95
MSDS Date:07/01/1989
FSC:3439
NIIN:01-015-6834
MSDS Number: BGSLC

L-TEC WELDING & CUTTING SYSTEMS

ASHTABULA, OH 44004
US

Emergency Phone: 216-992-1265, 216-992-5186

Info Phone: 216-992-1265

Cage: DO412

L-TEC WELDING AND CUTTING SYSTEMS

710 ASHTABULA, OH 44004 US

Telephone: 216-992-5186

Cage: 55019

CARBON

CAS: 1333-86-4

RTECS: FF5000000

Fraction By Weight: 0.06%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.65%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.35%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <0.50%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.4%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0.1%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 1.7%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

TITANIUM

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: <0.10%

OSHA PEL 10 MG TIO2/M3

ACGIH TLV: 10 MG TIO2/M3

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: BALANCE

OSHA PEL 10 MG FE2O3/M3

ACGIH TLV: 5 MG FE2O3/M3

ZIRCONIUM

CAS: 7440-67-7

RTECS: ZH7070000

Fraction By Weight: <0.50%

OSHA PEL 5 MG/M3/10 STEL

ACGIH TLV: 5 MG/M3/10 STEL;9192

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: TO 100%

OSHA PEL 10 MG FE*2O*3/M3

ACGIH TLV: 5 MG FE*2O*3/M3

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS NOT HAZARDOUS UNTIL USED IN
WELDING. THEN METAL FUMES,ULTRA-VIOLET RAYS,NOISE AND ELECTRIC
SHOCK ARE HAZARDS.CHRONIC OVEREXPOSURE TO METAL FUMES,MAY AFFECT
PULMONARY FUNCTION.
Explanation of Carcinogenicity:IARC & NTP LIST CHROME AND NICKEL AND
SOME OF THEIR COMPOUNDS AS CARCINOGENS.
Effects of Overexposure:METAL FUME:METALLIC TASTE,NAUSEA,DIZZINESS,
FEVER,POSSIBLE ALLERGIC REACTIONS. ULTRA-VIOLET RAYS:"SUN BURN" OF
EYES AND EXPOSED SKIN. MAY CAUSE PERMINENT DAMAGE TO VISION.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS.

First Aid:ELECTRIC SHOCK:TURN OFF POWER. GIVE CPR OR ARTIFICIAL
RESPIRATION.IF NEEDED. GET MEDICAL ATTENTION. FUME INHALATION:
REMOVE FROM EXPOSURE. GET MEDICAL CARE. ARC BURN:(ESPECIALLY EYES)
GET MEDICAL ATTE NTION.

Flash Point:NONE
Extinguishing Media:USE EXTINGUISHING AGENT APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS MAY IGNITE
COMBUSTIBLE MATERIALS.

Spill Release Procedures:SWEEP UP RESIDUE. TAKE CARE TO CAUSE A MINIMUM
OF DUST.
Neutralizing Agent:NONE

Handling and Storage Precautions:PRODUCT IS NOT HAZARDOUS IN STORAGE.
LIFT PROPERLY WHEN HANDLING.

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATOR WITH METAL FUME
CARTRIDGES WHEN WELDING IN AREA WHERE EXPOSURE EXCEEDS TLV/PEL.
Ventilation:USE VENTILATION AND LOCAL EXHAUST TO KEEP EXPOSURES BELOW
TLV/PEL.
Protective Gloves:WELDERS GLOVES (PROTECT FROM THERM BURN)
Eye Protection:FACE SHIELD WITH ANSI Z49.1 GLASS.
Other Protective Equipment:CLOTHING TO PROTECT FROM RADIATION,SPARKS,
ELECTRIC SHOCK,THERMAL BURNS.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE.
Supplemental Safety and Health

HCC:N1
Appearance and Odor:BARE OR COATED STEEL WIRE.

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:FUMES OF METALS & OXIDES OF
METALS,CARBON AND NITROGEN.

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.